The Frigidaire door lock/latch 131763202 has been used on many different models of washers over the years. Removing and installing this part is an easy that only takes a few minutes. These are some of the symptoms you can experience when the door latch/lock fails: door won’t lock, door won’t unlock, E47 error code, agitates but won’t spin, and more.
Here is how to replace the door lock/latch assembly:
Always unplug your appliance before working on it. First open the door and remove the two phillips screws.
Next remove the door boot seal clamp and peal back the door boot to give you access to the door lock. You should be able to pull the door lock out and remove the three wire connects that plug into the door latch.
Re-install the parts in the reverse order and test out the washer to make sure that it is operating correctly.
If you have a bad door lock/latch and need to purchase a new one, click the link below: